Nut Guitar Bone 43 mm 1 11/16 RH 9.5 Radius

Description

Guitar Nut Right Hand 43mm
Bone
.238" Thickness (6.0mm (15/64")
.364" Height (23/64" or 9.2mm) in middle
1.702" length (1 11/16" or 43.2mm)
9.5" Radius
This is a bone nut, the product is formed with Bone material.
It is pre-shaped and pre-sized.
Please note there are a number of width and slot sizes produced, please check the drawing detail for fit for your application.
This product is produced for Bitterroot Guitars.
We are not associated with the original manufacturer, these parts originate from our suppliers only.
Specifications:
Right Hand
Oxen Bone Nut
.238" width (6.0mm or 15/64")
.346" height (23/64" or 9.2mm) in middle
1st string height is .328" (21/64" (8.30mm) at top edge of nut
6th string height is .339" (Just over 21/64" 8.6mm)
1.702" width (1 11/16" or 43.4mm)
String spread is 1.358" Typical for width of nut (1 23/64" or 34.5mm)
Radius 9.5"
Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.
Note: This is a flat bottom nut similar to many modern G Style nuts, it is not tapered to fit older designs.
Natural Material
This Product may contain a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm