Nut Guitar Bone 12 string Electric 1 3/4 inch RH 109430

Description

Guitar Nut Right Hand 45mm
12 String Electric guitars
Natural Bone Material
For 12 String Electric Setups
.20" Thickness (5.0mm just over 3/16")
.316" Height (5/16" or 8.0mm) in middle saddle side
1.78" length (1 25/32" or 45mm) on saddle side.
It is pre-shaped, pre-slotted and pre-sized. This product is designed to be slightly oversized to allow for variations in guitar setups. You may need to adjust width or height to accommodate your specific setup. Please check dimensions, there are a lot of 12 string setups and they vary from model and manufacture with various width of nuts.
This product is produced by Bitterroot Guitars and is not authorized or associated with any specific guitar manufacture. This is an aftermarket part, the reference is to communicate the application and use of the product itself.
Specifications:
Right Hand
Natural Bone Nut
For 12 String Acoustic or Electric Setups
.20" Thickness (5.0mm just over 3/16")
.316" Height (5/16" or 8.0mm) in middle saddle side
1.78" length (1 3/4" or 44.5mm) on saddle side.
String spread is 1 1/2" (1.507") Typical for width of nut
Radius 16"
Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.
Note: This is a flat bottom nut, it is not tapered to fit older designs.
Natural Oxen Bone Material.