Nut Guitar 44 mm 12" Radius RH post 2014 Epi White

Description

Guitar Nut Right Hand 44mm
Replacement for Post 2014 Epiphone® Style 12" Radius
Composite Resin.
For Modern post 2014 Epiphone Style
.24" Thickness (6.1mm (15/64")
.391" Height (25/64" or 9.9mm) in middle
1.735" length (1 47/64" or 44mm)
This is a composite nut; the product is formed with plastic resin material. It is pre-shaped and slotted, but may require some shaping and trimming to fit your specific guitar.
This product is produced for Bitterroot Guitars.
We are not associated with the original manufacturer, these parts originate from our suppliers only.
These are not made by the original OEM suppliers.
Specifications:
Right Hand
Composite Resin.
For Modern post 2014 Epiphone Style
.24" Thickness (6.1mm (15/64")
.391" Height (25/64" or 9.9mm) in middle
1.735" length (1 47/64" or 44mm)
1st string height is .363" (23/64" (9.2mm)) at top edge of nut
6th string height is .368" (9.3mm (25/64"))
String spread is 1.358" (1 23/64") Typical for width of nut
Radius 12"
Depending on your guitar, you may have to sand for height or adjust string slot cut for setup.
Note: This is a flat bottom nut similar to many modern post 2014 E Style nuts, it is not tapered to fit older designs.
Molded Resin Material.
Gibson®, Epiphone®, Les Paul®, S.G.®, Flying V®, ES-175®, ES-335® and P-90® are registered trademarks of Gibson Guitar Corporation. The reference is for the purposes of identifying a cross reference for this product, these product are made for us and do not originate from the OEM supplier or source.