Nut Curve/Flat 1 11/16 43mm Composite White S/T 7.5r 109301WH

Description

Nut, Curve/Flat Bottom, 1 11/16", 43mm, Black, for S or T Type Guitars, Right Hand
Can be used curve or flat bottom (cut lower tabs off for curve setup)
7.5" Radius
Antique White Finish
Pre-Slotted string locations.
Specifications:
Right Hand 6 string guitar setup
Overall width 1 11/16" (43mm)
Antique White molded plastic with glass reinforced acetal copolymer compounded that provides a lubricated surface for nut.
Pre-slotted for standard string setup
Overall width is 3.25mm (.129")
Overall height at string 1 (high E) - 0.16" (slightly over 5/32")
Overall height at string 6 (low E) - 0.16" (slightly over 5.32")
Upper radius (string) is approximately 7 1/2"
Bottom edge is flat or can be curved if you remove the lower tabs (radius is 7.5" on the bottom)
This product is a formed acetal copolymer glass reinforced plastic molded nut.
The plastic material is provides a pre-lubricated surface for smoother string action.
Please note: due to the variations in guitar setups, you may need to sand or adjust this part to fit your specific guitar. There are a number of radius and bottom setups, widths and other details that vary from guitar manufacturers, if you have questions, please email us, we will try to answer your questions as to fit, we cannot guarantee fit for specific guitars, there are so many variations from year to year and model to model.
You may need to adjust this product to fit your specific application.
NOTE: In order to use on a curved nut area, you will need to remove the bottom tabs on this nut.