NEW Graph Tech PT-5072-00 Nut For Fender 50's-70's 7.25" Radius Guitars - BLACK

Description

NEW - Graph Tech BLACK TUSQ XL Nut, Flat Bottom
#PT-5072-00
If you have a Fender guitar or re-issue from the 1950's-60's or 70's, this is your nut! A 7.25" radius, work with a curved or flat bottom and permanently lubricated for great tuning stability.  It works in both a flat bottom or curved bottom nut slot due to its ingenious design, just sand off the tab for a curved bottom.
It is pre-slotted to make for a quick and easy install.
For just about all Fender electric guitars made in the 1950’s, 60’ and 70’s… that’s a lot!
The 7.25” fingerboard radius originated in the early 1950s and was used for most Fender electric instruments until the 1980s. In the 80's it was changed to a slightly flatter
9.5" radius.
MEASURES
WIDTH
LENGTH
HEIGHT
E TO E STRING
APPROX INCHES
1/8"
1 11/16"
7/32"
1 13/32"
INCHES
0.130
1.700
0.213
1.390
MILLIMETERS
3.30
43.18
5.41
35.31
Manufactured by Graph Tech
Is the love you have for your guitar being strained by tuning problems?
Graph Tech your axe with
BLACK TUSQ XL
, the self-lubricating nut with tone, and rekindle your passion for playing!
·
Increase your sustain
·
Improve the tone of open notes
·
Eliminate tuning “ping!”
·
Stay in tune even with the hardest whammy use
One of the key causes of tuning frustration is string binding at the nut.
BLACK TUSQ XL
nuts alleviate the binding grip of the nut on the string and reduce friction between the nut material and the string.
As strings move across a
BLACK TUSQ XL
nut, they shear open microscopic “capsules” loaded with Teflon lubricant.
Teflon is 500% more slippery than graphite and is impregnated throughout the
BLACK TUSQ XL
material, so its lubricating properties will never wear out.
For strings, it’s like a hardwood floor covered in marbles… strings glide effortlessly back into tune.
It’s that simple!
Play longer, harder, and with more confidence… work that whammy bar!
BLACK TUSQ XL
nuts will keep your guitar in tune longer than graphite, bone, plastic, or synthetic nuts.
In addition, a
BLACK TUSQ XL
nut has crystal clear tone and sustain.
BLACK TUSQ XL
nuts are factory-installed by Cort, Carvin, Dean, Fender Custom Shop, Fernandes, Gibson, G&L, Ibanez, LAG, Ovation, Peavey, Parker, and Schecter.
Powered by SixBit's eCommerce Solution