75HP 460V Rotary Screw Air Compressor 3PH Variable Frequency Drive 350CFM 150PSI

Description

Model: SC55V
【 Specification】:
Power : 75HP / 55KW ;
Voltage : Input Voltage ( V / Hz ) : 460V / 60Hz ;
Electrical ( Phase ) : 3ph ;
Air Flow : 350 cfm ;
Output Pipe Diameter : NPT 1 1/2”
Max Working Pressure : 125-150 psi / 8-10 bar;Full Load Amps : 173
【Characteristics 】:
Air Cooling Direct Driven Stationary Screw Air Compressor , Built-in Air Oil Separator ,
All the compressors we produced are qualified for CE certificated.
【Rotary Screw Air Compressor】:
HPDMC compressors are used safely in all applications of all small and medium sized businesses,
we help drive your profitability by lowering your total cost of ownership while providing you with the performance and reliability
that you have come to expect from HPDMC compressors.
【Advantages】:
The SC series rotary screw compressor operates without the elevated vibration and sound levels normally associated
with typical piston compressors,HPDAVV compressors feature a small footprint
and are built to provide exceptional reliability and extremely low maintenance.
【Application】:
Air Brushing,Blow Cleaning,Bolting/Wrenching,Brad Nailing/Stapling,Cutting,Drilling,Finish Nailing,Framing Nailing,Grinding,
HVLP Painting,Hobby Nailing,Hobby Painting,Inflation,Roof Nailing,Sanding,Spraying,Surface Prep
【
Caution
】:
Please read the operate manual carefully before start the compressor working
— Don’t dismantle any connector or equipment when machine is
running. Otherwise, the high-pressure gas and high temperature will
hurt you seriously.
— Please pay more attention to parts such as pump, oil tank and
pipelines, because they are high temperature when machine is running.
— Don’t try to change the working pressure rated . Because change
working pressure exceeding the rated range will cause machines to
overload and stop to work.
— Provide proper grounding connection for electric parts according
to electric security regulations. Use suitable wires matching the
working power, otherwise they will burnt out due to high temperature
or some other dangerous events occur.
— The compressed air for breathe use is prohibit.
Regular maintenance interval schedule:
Every 50 hours or weekly
--- Check oil level.
--- Check intake filter, if necessary clean it.
--- Drain condensation water from oil tank.
Every 500 hours
--- Check and adjust belt tension if necessary (belt driven only)
Every 2000 hours
--- Replace lubricants (for mineral lubricants oil)
--- Replace oil filter.
--- Replace intake filter
Every 4000 hours
--- Replace lubricants (for synthetic lubricants oil)
--- Replace oil separator
--- Clean cooler for dirt
【
Attention
】:
1.Replace filter element and lubricant after first 500 hours of operation.
2.Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts.
3.The service life of compressor depends on the environment conditions such as dust, vent etc.
【
Guarantee period
】:
HPDMC products enjoy 1-year guarantee calculated from the buying date for complete machine.
we will not offer free of charge service to repair damaged machine due to installation error, using
error, bad oil, maintenance error and use of not original manufacturer.
On Nov-23-21 at 21:40:26 PST, seller added the following information: