50 HP 460V 37KW Industrial Rotary Screw Compressor 3 Phase 125PSI @ 219-198 CFM

Description

【 Specification】:
Power : 50HP / 37KW ;
Voltage : Input Voltage ( V / Hz ) : 460V / 60Hz ;
Electrical ( Phase ) : 3ph ;
Air Flow : 219-198 cfm ;
Output Pipe Diameter :  NPT 1 1/2” ;
Max Working Pressure : 125-150 psi / 8-10 bar;
Full Load Amps : 116
Package size: 65*43*60 inch
Weight: 1565 lbs
【Characteristics 】:
Air Cooling Belt Driven / Direct Driven Stationary Screw Air Compressor , Built-in Air Oil Separator ,
Motor RPM : 3600;All the compressors we produced are qualified for CE certificated.
【Application】:
Air Brushing,Blow Cleaning,Bolting/Wrenching,Brad Nailing/Stapling,Cutting,Drilling,Finish Nailing,Framing Nailing,Grinding,
HVLP Painting,Hobby Nailing,Hobby Painting,Inflation,Roof Nailing,Sanding,Spraying,Surface Prep
Garage & Industrial
Features a programmable control system
Reduces your air system footprint and allows for easy maintenance
We are more than a factory but a trustworthy air compressor solution provider.
Caution:
Please read the operate manual carefully before start the compressor working
— Don’t dismantle any connector or equipment when machine is running. Otherwise, the high-pressure gas and high temperature will hurt you seriously.
— Please pay more attention to parts such as pump, oil tank and pipelines, because they are high temperature when machine is running.
— Don’t try to change the working pressure rated . Because change working pressure exceeding the rated range will cause machines to  overload and stop to work.
——
— Provide proper grounding connection for electric parts according  to electric security regulations. Use suitable wires matching the working power, otherwise they will burnt out due to high temperature
or some other dangerous events occur.
— The compressed air for breathe use is prohibit.
Regular maintenance interval schedule:
Every 50 hours or weekly
--- Check oil level.
--- Check intake filter, if necessary clean it.
--- Drain condensation water from oil tank.
Every 500 hours
--- Check and adjust belt tension if necessary (belt driven only)
Every 2000 hours
--- Replace lubricants (for mineral lubricants oil)
--- Replace oil filter.
--- Replace intake filter
Every 4000 hours
--- Replace lubricants (for synthetic lubricants oil)
--- Replace oil separator
--- Clean cooler for dirt
Attention:
1、Replace filter element and lubricant after first 500 hours of operation.
2、Use incorrect lubricant oil and spare parts will cause compressor damage, only use original manufacture oil and parts.
3、The service life of compressor depends on the environment conditions such as dust, vent etc.
Guarantee period:
HPDMC products enjoy 1-year guarantee calculated from the buying date for complete machine.we will not offer free of charge service to repair damaged machine due to installation error, using
error, bad oil, maintenance error and use of not original manufacturer parts.For routine maintenance note that HPDMC technical service team are able to provide you with assistance and spare parts.
On Aug-20-21 at 02:10:37 PDT, seller added the following information: