1981 Ski-doo Blizzard 9500 Seat cover new Custom colors MADE IN USA

Description

New aftermarket seat cover for Skidoo Blizzard 9500 1981.
Your choice of colors from the charts above. If you need a color not
in the chart, please contact us. We stock thousands of yards of vinyl with hundreds of color
and pattern choices. Flat rate pricing on any color choice above and any
color we have in stock
(
excluding specialty prints).
Subzero coldcrack marine grade, mildew resistant vinyl. The top section is a 4-way stretch non slip top.
Listing is for seat cover only, not the complete seat assembly.
Return Policy:
Please read return policy prior to purchase. We MUST be notified about any quality issues of the seat cover we made you within 7 days of receipt. We warranty our product
s to be free of defect
, of good
quality and to fit the models listed. We do not warranty your ability to install, choose the right model, you w
re
cked, rolled, blew up,
sold your sled, or your spouse got mad
,etc.
Any seat cover that has been installed cannot be returned, it must be returned in the condition it was ship
ped to you. Please dry fit the seat cover first. If we make a mistake, we will
make it right, no matter where you live.
.
Model fitment:
We make every attempt to list all the models we know our pattern to fit. If it is not on the list, we cannot guarantee fitment.
To find your exact year, please look at the manufacturer date stamped on the side of the tunnel. If all you have is a VIN, please contact your dealer to have them trace that and tell you what exact year and model it is. Example, if manufacturer date is 03/2010, that machine is a 2011 model, not a 2010. Seats vary drastically year to year.
Snowmobiles over 10 years old, may not have OEM support any more, and parts numbers are hard to cross reference. We make every effort to research what models our patterns fit. Our data is only as good as the database(s) and our experience is. We often find odd models, limited editions, sno check, etc that are not in the database.
Not all models on our database cover models made for countries outside the USA. Most of the time its not an issue, but we do see instances where international snowmobile seats are different than what we have in the USA. It also does not cover the “build your own sled” promotions that manufacturers had/have. Many older sleds, people have swapped seats out from other models or years.
If you are not positive it’s the original seat, drop us an ebay message and we will do our best to help you out. With over 30 years of experience with snowmobiling and snowmobile related business(es), we have a vast knowledge of snowmobiles, but are far from omniscient.
Most optional 2up seats for single rider sleds are NOT in the database and can be very difficult to validate. Occasionally some seats are recalled for manufacturer defect. Those seats will not be in the database as the numbers have been superseded with the new part number.
Most sleds over 10 years old, are now being dropped from OEM part support by many of the manufacturers. We accumulate data over the years of research and experience. Many a times we find we just cannot cross reference models we once did 2 years ago, because they are NLA from the manufacturer. We also occasionally find mistakes in the manufacturer database.
Installation.
Unless specified with special instructions, most seat covers are installed by removing your stock seat cover and installing the new one using a staple gun. For most Arctic Cats, you will need to use the existing lumbar seam rod(metal rod that goes in the lumbar seam where the straps are attached to the seat) and the U shaped rod that holds the straps through the foam from your old seat. Those are no supplied. A fabric steamer(hand held ones work fine and are available at Walmart or other department stores for under ) work very well to help remove the remaining wrinkles. You can also use a hair dryer carefully on low heat. Some seat covers or seat mod kits may require the use of 3M 90 Spray(Home Depot, Hobby Lobby, Joannes Fabric, and other hardware stores) adhesive to assist in the installation. We will usually notate in the listing any special instructions needed if applicable. To save on trees and waste, we do not include instructions with the shipment.
Most seats do not come with tail light holes cut out. Because these patterns may fit multiple models that had a tail light mounted on the tunnel, we do not cut them out and leave that for you to complete. This is the case with most Arctic Cat, Polaris and Yamaha seats. Most Skidoo seats have a recessed tail light pocket and that is included as part of the pattern. Please feel free to ask any questions we will help out where we can.
We are constantly working on adding new models to our line up. Please visit our Ebay store to see our listings. If you do not see what you need, please ask and we will assist you.
Please do not use a knife to open the box when you receive the cover, to avoid damage to the vinyl.
International Buyers – Please Note:
Import duties, taxes and charges are
not included
in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as "gifts" - US and International government regulations prohibit such behavior.